Introduction:
The CanNeed-Chip-A200 is a semi-automatic machine for counting components on 7-inch to 15-inch reels. Users can manually load up to four reels at a time into the counter. The system verifies the part number, utilizes X-ray imaging for scanning and counting, automatically connects to the MES system for deduction, and automatically prints counting labels, providing a convenient and efficient solution.
Equipment Dimension Diagram
Technical Parameters
Category
Parameter
Specification / Value
Detection Parameters
Scanning Size
180mm – 380mm
Speed
≤10 seconds (for 4x 7-inch reels; single reel for other sizes)
Component Size
Minimum CHIP size 0201 / 01005
Reel Height Acceptance
8mm – 45mm
Counting Accuracy
≥ 99.7%
X-Ray Source
Tube Max Voltage
100 kV
Tube Max Current
4.5 mA
Tube Max Power
150 W
Flat Panel Detector
Detector Type
Amorphous Silicon Flat Panel Detector
Pixel Size
0.138mm
Machine Status
Loading Method
Manual Loading
Unloading Method
Manual Unloading
Barcode Scanning Method
Automatic CCD Scanner (Optional)
Label Application
Manual Application (with misplacement prevention)
Label Printing
Auto-connect to REP/MES systems, automatic barcode printing
Equipment Orientation
Front Load / Front Unload
Other
Machine Dimensions
1330mm (L) x 1480mm (W) x 1850mm (H)
Net Weight
1210 KG
Power Supply
220VAC ±10%, 50/60Hz
Power Consumption
1.5 KW
Air Pressure
0.5 MPa
Operating Temperature
< 40°C
Relative Humidity
Standard 70% @ 32°C
Safety
Complies with National Safety Standard < 1µ Sv/h
